APPLIANCE INSTALLATION*

Australian Standards for electric/gas oven installation are used to make sure kitchen appliances are safely used and correctly installed.
For electrical appliances, only a licenced electrician can install as there are electrical circuits and multiple wires involved. The electrician also needs to look into your existing wiring to ensure that your wiring is capable of handling the requirements of your new oven or cooktop. Newer models can often require increased circuitry.
If you need to upgrade your wiring to suit the power needs of your new oven, a site inspection can be arranged to provide a quote to do this.
For gas appliances, ONLY a licenced gas fitter/plumber can install. Gas is dangerous and the gas needs to be connected to the correct gas line and adhere to regulations around minimum clearances for combustible materials.
When the installation is completed, your electrician or plumber will provide you with a Compliance Certificate.

Simply peel the stickers off. We recommend using eucalyptus oil to help remove any sticker residue from your appliance.

Yes, a ‘connection’ is plugging an appliance to an existing power supply, or hooking a laundry appliance to available plumbing. Installation is more complex and requireds qualified tradespeople (e.g. electricians, plumbers, carpenters etc) to fully install to your cabinetry and connect to services like electricity, gas and water.

If you are purchasing both gas and electrical appliances together – we will co-ordinate to have the electrician and the plumber arrive together to do the job. If you also require a carpenter to do some amendments to the benchtops/cabinetry then all three trades will arrive together.

A site inspection can be arranged at a cost of $99. If you decide to go ahead with the quote, the $99 site inspection fee will be redeemed against your installation quote

A standard installation includes the following - bringing the appliance/s to your home, safely remove any old appliances, ensure the suitability and compliance to install the new appliances, install the appliances and take away the old appliance and packaging for the new appliances.
For an electrical appliance installation, the correct legal sized wiring must be present.
For a gas appliance installation, there must be a suitable gas connection and power point. We do not install/replace gas stop valves or replace power points. We can quote to do these services.